Hiem joint size on crossfire 150
 

Any one know the size of the heim joints on the front suspension of a crossfire 150. Mine is 100 miles away now and I am considering replacing a few that rattle pretty good before they fail. Wanting to get Spare parts there before something fails and I get stuck back in the woods.(been getting braver heading back in for 5 or more miles )

:evil:
they are 12mm.
i keep them and ball joints in stock for crossfires all the time. if you need contact me

Thanks jersey devil I am talking the joints at the ends of the a arms that mount to the frame. 12mm seems a bit small. 12mm are the tie rods or ball joints right? These hiem joints have like a 1/2" size bolt thread and a ball with around the same 1/2" hole. Am I wrong and that's 12mm?

:evil:
yep 12mm
an inch is about 25.4mm so it's close to 1/2" but a hair smaller

Thanks. My mistake should have thought it out more just a brain fart on my part.

:evil:
no prob . i have just a little experience w/ crossfires
before
https://fbcdn-sphotos-g-a.akamaihd.n...be5a0ed672e69a
after
http://fbcdn-sphotos-e-a.akamaihd.ne...95738258_n.jpg
and like i said if you need them , i got them
http://www.gotbuggy.com/