carter gtr 250
 

I recently bought a carter gtr 250. The ignition switch does not work. what wires do I need to jumper in order to try and start it up? It is a five wire. I bought a five wire switch for a buggy but the connectors are not the same.

Ok i got a new switch for a buggy. it is a five wire switch but the connector was wrong. i added the correct connector but i still have no spark. when the switch is on, i have horn, lights, and turn signal. when i turn to start the starter spins but i still have no spark. could i still have the switch wired up wrong? someone please help.

It is probably your CDI or your coil if you aren't getting any spark.

Verify the wiring is correct, then work from there.

It ended up being the switch. ordered a new one and now i have spark. Still doesnt run so now
i guess i have a carburetor problem.