Sons first buggy new harness help
 

So i picked up a gk01 roketa from a buddy of mine. Got a new short gy6 from amazon and it ran great around the block a couple of times. We get it out to the desert and it wont run. Figured out i need a new harness just to clear myself of any electrical issues. I contacted some dude and ordered a new harness but when I asked about shipping info he didnt like it. I ended up getting the harness so everything is good. Problem is theres no instructions so im wingin it. I can take pics and hopefully i can get this thing going again for my 7 year old son. Please help

If the harness if for a GK01 it should be plug and play. If not you will need a wiring schematic which will help but wire colors will be different.

I ordered a gk01 harness now is that whay i really got who knows? I dont know if all gy6 motors are the same. I dont know what wires go to the resistor or the voltage regulator im not seeing that yet

Although the GY6 are basically the same manufacturers will wire differently. If the harness is for the GK01 it should just plug and play.

I have a few prongs left and i dont have a prong that matches either of the voltage regulaters i have. I have to bypass the kill switch cause i dont care too much for it. Also eliminate thr turn signals and horn. Sometime this week ill take some pics amd post them . I want to keep the harness as stock as possible

Pic
 

Testing pics here

Here are the left over plugs i got. Im missing the 2 that go to the resistor and the voltage regulator. Id like to buy parts that will match the harness so i dont start hacking up a new harness.

Platform
 

The pics really don't help much. All GY6 resistors I have run into for the GY6 150 has either a red or green wire but only one wire. Also if what I see as the cdi it has one plug going to it. The 150 has 2 plugs to it, a 2 pin and 4 pin.