Brake Lights Issue
 

Hey guys, I just noticed my break lights aren't working, the running lights work.

Could I have burnt out both bulbs at the same time or could I have another issue somewhere?

I checked connections and they seemed fine

thanks in advanc3

Hi Mac, your brake light bulbs should have 2 filaments inside of it. usually the brake light aka, turn signal filament is the larger one. check both bulbs 1st. and if they are good then make sure you are getting fire to them. the brake lights and running lights are on different circuits.

let us know if any more ?

I've got a Trailmaster 300. My brake/tail light bulbs burn out on a regular basis. I don't know what the problem is.

If the bulb checks out OK then check the pressure switch at the master.