Anyone interested in this stuff??
This is all stuff I'm not using any more, so if you see something you want, let me know. All stock parts from a yerfdog Spiderbox. The Mikuni clone carb is a VM 28mm. The tires are brand new Kenda Scorpion 21 7 8 tires with inner tubes. (I have them overinflated because I'm trying to get them back to natural shape. They were really distorted from shipping when they tie wrapped a bunch of them together in storage containers. Should be no problem once they are mounted on rims.
Koso 14 gram rollers Shocks are from a Honda TRX 200. They mount up perfect on the spiderbox with no mods, but are a little soft for off road. Really good for flat pavement or really light riders. http://i1166.photobucket.com/albums/...ps3e3cb0d4.jpg http://i1166.photobucket.com/albums/...ps3a392c05.jpg http://i1166.photobucket.com/albums/...ps80e225e5.jpg http://i1166.photobucket.com/albums/...ps2b66852e.jpg http://i1166.photobucket.com/albums/...ps497c6efa.jpg |
What engine is that off of and are any of those transmission parts?
|
:evil:
how much? |
is the comet/tav driven a 7-inch dia? if so, lmk price.
|
Sorry, should have posted more info when I listed this.
Quote:
Quote:
Quote:
|
:evil:
maybe all shoot me a pm |
PM sent. let me know if interested. Thanks
|
There is an agreement in place for the whole lot. Should that fall through, I will let everyone know.
I did also find a Ban Jing performance clutch bell in GC if anyone wants that too. Looks like this one. http://thumbs2.ebaystatic.com/d/l225...BnLAQOCjow.jpg |
Parts are SOLD!!!!!
Thank you |
Just found a bunch more stuff. Let me know if interested in this batch.
Stock 150 cyl and piston in good shape Stock crankshaft in good shape A 10, A 11 cam, and stock cams Small muffler from dirt bike Ban Jing clutch bell 6 and 8 pole stators with flywheels http://i1166.photobucket.com/albums/...ps3645f833.jpg http://i1166.photobucket.com/albums/...ps904e0ef0.jpg |
you don't have the screw that goes in the top chain guide that holds it in?
|
1 Attachment(s)
Here is a pic of the screw i need
|
My basement is a mess right now, but I'll look.
I have a feeling it just went out with the parts I sent out today. I'll let you know if I find it though. |
ok thanx
|
Sorry dude. I must have shipped it with the parts that sold.
|
ok n/p
|
Nobody?
|
Back from the dead thread.....
Found some more stuff I'm not using and would like to see it go to someone who will. Please PM me with any questions All parts are for/from a Howhit GY6 150cc 1. 6 pole magneto with flywheel. 3. Ban Jing clutch bell. Black "snowflake" design bell posted in pic above 4. Upgraded battery cable wire. Next size larger then stock. 8 GA I believe it is. 3' of red and 4' of black. (no terminals included) 5. Decompression tube 6: Anyone have a BD heavy duty axle? I have spare hardware for you. Hubs and retainers. (My axle bent, so I stripped the parts from it) |
Hi X, i'm looking to convert a 125 to a 150. I'd be after jug, head, piston, cams, valves 8 pole mag and flywheel. 39T sprocket. muffler. I have to double check to see if the stud spacing is the same. I haven't diasassembled the 125 yet.
|
Let me know. I'll make you a heck of a deal.
|
Will do, got hit with a project at work this weekend after our electrician went MIA and blew the timetable for rough electrical and framing inspections ....stopped the job dead in it's tracks. I've got a buttload of boxes and wire to run over the next two days. Should be able to get into the engine by mid week.
|
Found some shocks I don't need too.
Photobucket is giving me issues right now. I'll post pics later., |
|
Xlint, the head stud spacing on the engine I have is 54 mm, can you checjk the howhit head for me? Thanks
|
It has 54mm spacing
|
IHow much for the cams, and clutch bell and 8 pole stator ?
|
Quote:
|
Yes, dang cell phone auto correct.
|
Only cam I have available is the A10 $10
Ban Jing clutch bell $20 8 pole magneto/FW $10 I'd do all of that for $40 SHIPPED to lower 48 |
pm sent
|
X Bird, clear your PM box. I can't send a reply.
|
Quote:
|
Quote:
|
Quote:
Anyone interested in this stuff? |
All times are GMT -5. The time now is 05:39 PM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.