How to Videos
 

Hi,

I was watching some of your YouTube videos, and I
noticed you put up recently a video on "How To" change
your rollers/sliders from your variator and changing the
main torque spring from the clutch.

My suggestion is to put a link on the top bar menu section
named "How to Videos", and place all of your instructional
videos there.

Excellent job on part 1 and 2 on those videos.

Who ever hasn't seen it, here you go:
http://www.youtube.com/watch?v=iPA6VK9cP20

http://www.youtube.com/watch?v=yizYOOu3T4w

I'll take a look at that. For now I'll put that in the tech section.

You tube has a 10 minute time limit on vids. I trimmed those as much as i could and STILL had to create 2 vids!

man!

Very good videos there!
In part 1, That "O' ring on the clutch nut, where the heck did that come from?

American Sportworks puts that o-ring in between a bearing in the CVT cover and the shaft of the driven clutch.

I really had to cram in those vids. You are only allowed 10 mins tops so I had to chop the heck out of it.

Ya, you have to decide wether you want just install footage or info footage, you can't cram both into 10 minutes. We're getting better at it here though.
I'm sure you've seen our videos.
One thing to be careful on is not to miss anything or "mis state" a procedure. It's why we don't do cam, piston or head install videos. There's too much that can be taken the wrong way or done differently that it just isn't worth the lawsuit.
People like to be shown how to do something but man, don't get it wrong or state that it works on ALL! Your email box will be flooded! :-)
Keep up the good work!