Best mods for a gy6 150cc
 

Hey i'm wanting to get the most out of my cvt. What items should i buy and out in there that would be a quick and cheap fix? Looking for more around a little bit of both speed but some good torque. Does anybody know the lightest pair of rollers that still oush the variator out all the way?

For us, we went with a set of 13g sliders and found those to be to our liking. It really depends on what you are going to do with it. We do a lot of riding at the top end so too light and we lost a lot of that. Cheap bang for the buck would be a uni filter, and variator / clutch mods.

trying to stay on top of speed 13 sliders-uni filter jets open exhaust some
you will still have low end

Thanks for the info I really made a mistake about a month ago I bought some 16gm sliders and everybody on these forums say that those are way to heavy and I can agree because since it's so a high ratio you really cant let off the throttle or else it will have trouble getting back up in rpms. I'm defiinatly going to get a UNI filter with a biggier jet and some 12gm sliders and mabey a 1500 spring.

12 sliders are equal to 10 rollers great for torque with a 1500 spring but you will lose some top end

well i will just try mabey a 11 or12 roller and a 150cc spring. I found a website that told me what each weight roller would do to performance. and 11 and 12 are an all around type which is kind of what I want now.

11 or 12 rollers will be better than 16 sliders which are equal to 14 rollers way to much
for a gy6-you will like the 1500 spring also