Dazon rear axle replacement
 

The splines on my Dazon rear axle were twisted going into the hubs. The right side mostly but both were not good. The Dazon rear axle is a straight width axle not taper. After looking around and taking measurements I determined that a Hammerhead axle will work. The Hammerhead is a chrome moly ,lightweight , tapered axle.Thats better... stronger ,lighter ,and it fits. Naturally the bearings/ seals were different than the Dazon, new HH ones were used.
So the whole rear axle assembly was a drop in replacement !:drive:

Stay tuned for more cross-over parts !