Roketa GK19 ignition wiring
 

I recently acquired a Roketa GK19 250cc kart that the wiring was completely hacked. It has an 18 pole stator, and a two wire trigger. The rectifier/regulator is present, but the CDI and connectors are missing. The three wires from the stator plug into the rectifier, but I am having trouble finding a diagram that indicates where the two wires from the trigger go (Green/white and Blue/yellow turning to Red/black and White/blue respectively). I assume this is a DC system, and will shortly be purchasing a DC CDI and ignition coil, but any assistance in wiring this thing back together will be greatly appreciated.

Solution
 

Here is what I came up with, and at least I got spark and it runs.