Yrf dog 3203/ohh65 oil drain plug
Hi can any one tell me where the damn oil drain plug is on the yerf dog 3203 please.
|
what kind of engine?
|
Tecumseh 6.5 hp ohh65
|
Should be a bolt with either a square head or hex head on the bottom of the engine case.
Here is a PDF manual, should get you started. http://www.manddsmallengine.com/tecu...81-1269-14.pdf |
Thanks every one but I've tried those bolts and no oil comes out. Any suggestions
|
add some oil ....
|
+1 for ^^
|
I would but it smells like old gas
|
And i want it all out and fresh oil
|
While my remark may seem a little "wise-guy," seriously, either you've got no oil in that engine, or what's in there is broken down and caked into crud. to see what's going on, remove the pipe-thread style drain plugs and poke a skinny screwdriver in. It may come out with clumpy black on it and some oil may begin to drain. if nothing comes out, you're running without oil.
|
the dip stick shows its full of oil. ive tried putting a screw driver down their and nothing happened but ill try it again
|
sounds like you're not finding the drain plug.
at the center of the very bottom of the engine, typically one in the front, one in the back, is either a square head pipe plug or a hex (allen) head pipe plug. remove one of those (whichever one will make the least mess and you can get a drain pan under.) These pipe plugs are at the base level of the engine, right next to the mounting plate it's bolted to. usually makes a pretty good mess of things when it drains. |
Thanks for every ones help i got it figured out! I couldn't find the right hex head and i got a bunch of shop tools for Christmas ( i'm 13)
|
Alrighty! Another minor on the forums! I'm 14 :D
|
yeah!!!!!!
|
All times are GMT -5. The time now is 04:18 PM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.