HH250ss cv axles
Can not get these bleeping axles off this steaming pile of horse bleep :cussing:
Done broke both ring clips in the cups snatching on the axles and broke a huge 3 jaw puller. Saw a thread on taking the little metal plugs in the back of the cups out to get to the bleeping clip and apparently those dont come out on mine as they havent budged even with a hammer and punch.......I dont know what else to do..... Any one have a pair of used axles and center shaft i can buy? |
I had that same problem with a Joyner - same setup. I ended up making some wedges about 6" long out of oak. I placed one on each side of the CV and slowly and evenly drove them in
|
I finally got them apart by hooking one side to a tree and the other to my truck and snatching them apart and then flipped it over and did the other side the same way
|
All times are GMT -5. The time now is 08:38 AM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.