BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum (http://www.buggymasters.com/forum/index.php)
-   150cc GY6 and Under Engine Tech (http://www.buggymasters.com/forum/forumdisplay.php?f=29)
-   -   150cc Dazon - replacing seals for transmission shaft (http://www.buggymasters.com/forum/showthread.php?t=6497)

Sk8almost44 01-19-2019 11:09 AM

150cc Dazon - replacing seals for transmission shaft
 
4 Attachment(s)
Hello everyone. So I noticed a seal is very worn on my transmission shaft. I already have the cover off, and don’t want to go through the hassle to take it off again due to another oil leak. I want to replace the seal, which one am I buying? The bottom three? How do I replace it (how does this shaft come off)?

SYCARMS 01-22-2019 11:31 AM

There is a number on the seal, actually it will be the seal dimension. If you can't find the #'s than using a caliper measure the outside and inside dimension of the seal along with the width. Make sure your measurements are in millimeters. I would check all the bearings as well. Usually when a seal goes it is due to a bad bearing.

Sk8almost44 02-15-2019 11:40 AM

3 Attachment(s)
So I got it apart.. seal looks good, and bearing is destroyed. I cannot find the part online.. all I found on part of the busted bearing is spgbc 6005.

TBS99 02-15-2019 02:46 PM

Would this kit help you?

http://www.buggydepot.com/product/55...build-kit.html

Or try here,

https://www.dazonparts.com/go-kart-parts/go-kart-parts-dazon/dazon-raider-150-2006-and-earlier/dazon-raider-150-2006-and-earlier-transmission?page={page}


All times are GMT -5. The time now is 03:52 AM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.