I need help with the wire harness
 

Hi everyone,

I am trying to install my wire harness and i need some help since i do not know where each wire goes. i just want to make the buggy run with lights and turn indicators nothing more, i am not interested on the rpm or speed gauge or fuel gauge.

I have completely disassembled the buggy and now i am putting everything back together but i have no idea about the wire harness, its pretty messed up.

i have an 8 coil stator with 5 pins (3 pins on one plug and 2 separate wires) Green, yellow, white are the colours of the wires on the black plug.

http://i61.tinypic.com/166c21g.jpg

http://i62.tinypic.com/28vdcus.jpg


my CDI is AC with 6 pins (with a 2 pin plug and a 4 pin plug)

CDI

http://i60.tinypic.com/bfjkhh.jpg

Use this picture as reference to guide me on wiring the CDI

http://i62.tinypic.com/29j5w1.jpg

i have a rectifier with 4 wires on one plug

Regulator

http://i57.tinypic.com/302z7uo.jpg

Regulator plug

http://i57.tinypic.com/52j586.jpg




thank you

I also have these wires, after some examination i realised that these are the wires that connect to the CDI, stator and rectifier

http://i59.tinypic.com/2qbztog.jpg

These two connect to the CDI

http://i59.tinypic.com/jheiqs.jpg

this one connects to the black plug of the stator

http://i59.tinypic.com/6tcsyh.jpg

and this one connects to the rectifier, however the new rectifier that i bought does not fit on this plug, if i change the plug will it work or do i need a completely different rectifier?

http://i62.tinypic.com/2qiv7mo.jpg

After going through the wires i am really frustrated. They are really messed up. I want to buy a new wire harness that will connect the stator, CDI, rectifier battery, switch, auto choke and anything else required to make the buggy run.

can someone help me find this product?

what kind of buggy do you have? that will help us a lot.

name brand that is.`

People in this forum have identified it as a Blade 150DX or Kinroad GK150, you can see pictures of my buggy ion this thread

http://buggymasters.com/forum/showthread.php?t=3685

Please give me some guidance.....I just want to make the buggy fire up and run, i don't want any lights or any speed gauge. can someone guide me on what i need to do regarding the wire harness so that the buggy starts up?

Here is a list of the parts that i think i need:

1) stator
2) CDI
3) ignition coil
4) motor starter
5/ battery


do i need anything else so that the buggy starts and run?

done it, everything is up and running, however i have another problem with the engine now