BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum (http://www.buggymasters.com/forum/index.php)
-   Mini Buggy General Discussion (http://www.buggymasters.com/forum/forumdisplay.php?f=7)
-   -   on a buggy buying tear (http://www.buggymasters.com/forum/showthread.php?t=6151)

jmansracerocket 05-04-2017 07:44 PM

on a buggy buying tear
 
so that past week I've been searching and looking at other buggies. Monday I come home with a monster.
https://s26.postimg.org/4htz3xtmt/IMG_1275.jpg
https://s26.postimg.org/7eh047zgl/IMG_1284.jpg
https://s26.postimg.org/m1mjzmngl/IMG_1319.jpg

I have to say that this thing is a absolute pig! but I knew that when I was going to go buy it. The engine side frame work I am not a fan of at all. Kinda a poor design in my eyes. I picked it up for $125 bucks, and the blade single seater got a ton of good parts from it.

So today looking around again. Just for giggles and found a old hammerhead. Went and picked that up for $100 bucks. Long and behold I didn't know it has the aluminum mag wheels!!! So the blade will now be getting those.
https://s26.postimg.org/ni34evwp1/IMG_1331.jpg
https://s26.postimg.org/ekiehj491/IMG_1329.jpg

EVILWS6 05-04-2017 07:49 PM

Great price on both of your finds.

jmansracerocket 05-04-2017 08:03 PM

Quote:

Originally Posted by EVILWS6 (Post 52733)
Great price on both of your finds.

yeah I sure thought so

xlint89 05-04-2017 09:22 PM

What's that smell?

Is that a 2 stroke in that beast?


Yeah buddy.... i see a conversion in your future. Sled engine

jmansracerocket 05-05-2017 08:22 AM

Quote:

Originally Posted by xlint89 (Post 52735)
What's that smell?

Is that a 2 stroke in that beast?


Yeah buddy.... i see a conversion in your future. Sled engine

lol, I still haven't even finished my single hammerhead. I already stripped the parts off the yellow one that I wanted. So the blade has a single sprocket now, 4 new wheel hubs all the way around with new studs and hardware, and I swapped out the axle bearing carriers. That alone paid for itself and then some. The blade feels smoother pushing around because one of the axle bearings was frozen. Now that I got this hammerhead with aluminum wheels that will be getting swapped over to the blade. Plan now is to sell the yellow one, and keep the 2 seater hammerhead just for steel and parts. For $100 bucks I would have spent 4 times that just for the steel. :biggrin:

jmansracerocket 05-05-2017 02:37 PM

I forgot the hammerhead came with a brand new tire mounted on a rim. Also came with a old battery then I can turn into autozone for store credit. Just wet sanded and clean the polished wheels they are going to look good on the blade. I put air in all the tires last night, and they all hold air so good to go to swap all them over.

x-bird 05-06-2017 02:50 PM

yep, you are now definitely "THAT GUY" of the neighborhood.

jmansracerocket 05-06-2017 04:53 PM

Quote:

Originally Posted by x-bird (Post 52739)
yep, you are now definitely "THAT GUY" of the neighborhood.

Lmfaoooo

jmansracerocket 05-28-2017 07:38 PM

well did really well on the roketa. Sold today made a good profit, and got a ton of parts from it that I needed. Already buying another buggy tomorrow morning its a surprise.


All times are GMT -5. The time now is 12:45 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.