Like To GY6 for rebuild
As you may have read, my current buggy engine is one of those danged GY6 B type for which I got a Big Bore kit that doesn't fit. I can't get a big bore for it.
I would like to find a GY6 short case engine that has the four bolt valve cover so I can put the Big Bore on it. It doesn't have to have a good jug or piston. It needs to be rebuildable. |
Hey,
You might want to check out this store. The "B" gy6 i believe has the 57mm bolt spacing, and this place sells all sorts of hop-up parts for those motors. http://www.SPMOTOSTORE.COM/TAIDA_GY6...-01067-c69.htm |
keep in mind that the big bore kit you bought may require that the engine cases be machined oversize to fit it.
Pre-machined cases are available new. I don't know if it would work, but if the rod, crank, oil pump and transmission parts from the 2-bolt engine will fit in a 4 bolt engine, a less expensive option might be to purchase the machined case sides and swap the 2-bolt guts along with your big bore kit. |
yup, same company sells machined cases..
|
All times are GMT -5. The time now is 08:00 PM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.