Need help / my yerfdog won't start
hello all here is my issue, hoping someone can help..
was riding yerfdog up a big ramp after i reached the top i shut gocart down and just rolled backwards.. once i got down to bottom i went to start it up and it would not start. i have tried putting a screw driver accross the starter solinoid relayand i get noting not even a sparc.i have also recharged the battery and i get no clicking sound or anything.. starter is not even clicking.. can any one help.. |
Did the spring on your brake safety swith break or the switch fail?-I'd try to by-pass it first to see if that's the issue- just disconnect it and plug the two wires it was plugged into together
|
no i have bypassed the last year...
|
Check the main fuse
|
yeah i checked main fuse which i beleive is the one inside the little electric cdi box correct..
|
my son is so bummed out.. we were suppose to go riding this weekend and dam thing won't start...
|
yeah fuse looks fine, what else should i look for next.
|
hey medalstudman1.. what else should i be looking for ... fuse seems fine......
|
Have you verified the wires haven't came loose from the switches? That happens to me occasionally.
|
If your good there I would go through your connections in the electrical box. Pull everything apart and put back together to verify nothing has came loose.
|
yeah i checked switches every thing was connected i disconnected and reconnected the switches,ok thanks Soap, i will give that a shot... and go through the electric box
|
Looks like i found the problem. Battery wire was push up against engine and melted my positive wire.thanks for all Your help guys
|
Glad to hear you found it.
|
Sometimes its the stupidest thing....
|
That's a fact. I've had my fair share of those when working on these toys.
|
All times are GMT -5. The time now is 03:56 PM. |
Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.