brand new trailmaster 200e xrx wont turn over
 

I have the kart installed.. I was left with a Green and Black 2 wire connector with no where to connect it..

The kart will not turn over. The solenoid is good. I check the wiring by the key switch. The G/W wire goes into something (maybe relay) and comes out as R/Y wire.

If i bypass the (relay) it starts right up. Anyone know what this is? Is it causing the issue? Ive attached the pictures.

thanks in advance

Craighttps://1drv.ms/u/s!AtnsWwUUyJHLgohx...aHFMg?e=xznhla