rear wheels for my HH250SS
 

i'm looking for an extra set of rear wheels for my hh250. i would prefer aluminum but steel would work. i need a 4/137 bolt pattern and they need to be 10x8 or 10x9 wheels with a back side offset of 3 to 5 inches. if you have a set with good mud tires that even better. let me know what you have.
thanks.

well, since i got soooooo many responses on my first post.....:suspect:
i can also use the following wheels:
*need to be 4/137 pattern, 10" diameter
7",8" or 9" wide rim with an inside offset of at least 3"
aluminum or steel

anything?.........

Are you going to the buggy bash? If so I might have a set of rears for you. I have a set from my joyner with stock tires and a set with 19in hole shots on them. If you would have asked a month ago I would have shipped them but it's hard to find that kinda time in the spring and summer

i know what you mean chuck, especially for you in your line of work. i have some tires lined up but need the extra rims. if you decide to get rid of any of them let me know and send me the spec's on them(offset & width).....and maybe some pics. i don't even know where the next buggy bash is. usually they are too far for me to drive. if and when you want to sell the wheels let me know and i can create a call tag for pick up so you don't have to mess with shipping. i have an account thru work.

The next bash is in st. joes. I'll see if I can get you some specs. I dont have a problem getting rid of a set, it's just the time involved. If you can have them picked up though that would solve that

thanks chuck, i appreciate it.