BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum (http://www.buggymasters.com/forum/index.php)
-   150cc GY6 and Under Engine Tech (http://www.buggymasters.com/forum/forumdisplay.php?f=29)
-   -   Turbo Charger For GY6 125 to 150 (http://www.buggymasters.com/forum/showthread.php?t=6231)

fan4chevy 09-05-2017 10:11 PM

Turbo Charger For GY6 125 to 150
 
Hi all,

Looking for the most possible power without destroying this tiny little cc engine.

Anyone ever tried turbo chargers?

Anyone know much of this kit? http://www.ecotrons.com/products/sma..._turbocharger/

Charles

neo71665 09-06-2017 01:18 AM

Its been done but these little things don't put out enough air to spin the smallest turbos up. You'll basically be just adding an exhaust restriction that looks cool.

Another problem I have is the oiling systems on these things is so low psi it'll never keep a turbo oiled properly.

I also looked into the A.I.R. pump "supercharging" and the parasitic draw will be about as much as the added power pretty much leading it to equal out. Again leaving it to just looking pretty.

Once you have tuned a gy6 to all the commercially produced mods it boils down to there is no replacement for displacement.

fan4chevy 09-06-2017 11:58 AM

Sounds about right.

I am installing the 61mm big bore that you have to bore in by ncy. Sounds like that is the biggest reliable bore and all the reliable big bores need to be bored for.

So I guess that is where I must end it.


All times are GMT -5. The time now is 07:05 PM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.