How to wire 11 pole stator?
 

Trying to figure out how to wire 11 pole stator and 6 wire regulator

Do you have a wiring kit? Should be pretty much a plug and play.
If not, then there's other guys up here that sure can help you out.

This is what I have on wiring it up

http://www.dansgaragetalk.com/topic/...arnessdiagram/

If you want to DIY:

http://buggymasters.com/forum/attach...1&d=1513281216

Or if you want to plug and play:

BDX 11-Pole Plug-n-Play Adapter Kit
https://www.buggydepot.com/product/2...apter-kit.html

And the adapter install instructions:
https://www.buggydepot.com/tech-cent...-installation/

https://www.buggydepot.com/attachmen...ge_235_941.jpg

Thx guys and travis i was looking at that last night....The regulator i have is a 6 wire off of my hammerhead 250ss. 3 yellow wires go to stator and then the other 3 i assume are hot ground and idk about the 3rd. I cant remeber the colors other than a red and a green i believe.

Can someone link a regulator to use with the 11 pole? I bought the adapter got it wired up and thought i could use the old regulator from my 250 but it dont seem to work at anything above idle....it works fine on all my 250s just dont seem to be working on the 150 with an 11 pole stator.

Looking in the wrong places?

https://www.buggydepot.com/product/2...or-system.html

Yep! thats the one i ended up getting....just waiting for it to get here