Suspention
 

I have a ASW 150cc Carbide.The suspention isnt all that great was wondering if anyone out there had any good tips on how to modify or upgrade the suspention.More travel would be great!Sry guys got excited and put in the wrong forum!

ha thats all right ive been lookin around the suspension too havent seen too many great ones

Getting more travel would honestly take a bit of $$ even if you fond a place that made the components. Not really likely. You could probably upgrade the shocks but I always felt like the suspension was decent on the carbide. Are you finding that you are bottoming out?

Not really bottoming out.Passanger side a-arm keeps getting stuck with the tire in the air.Have the spring set in the hardest setting but when go through any big dip turn gets stuck in the air.Have a three wheeler till push it back down HaHa

you want your shocks to be soft and it will help.i dont know about yours but on my buggy the shocks are not mounted in the right place to work right.when the shock is fully compressed the a-arm should be at a 90 degree angel with the shock.this will let it move without binding.if its at more than a 90 it will not work as well and the farther from 90 degrees the less it works.
http://www.rctek.com/technical/handling/index.php
this is r/c cars but still will give good info