I don't see the sleeve in the pics which the variator rides on, also the center hole in the outer pulley fan looks a bit large. The end should be splined to mount up with spline on end of crankshaft. The sleeve is chrome looking and rides in the variator as well as on the crank, this is what the variator slides in and out on. I could not tell if this sleeve was still in the variator, but doesn't look to be. Go to my web site sycpowersports.com and look at the variators I have to see if you have all the parts shown. Also look at the outer pulley fan to determine if it looks like yours. Let us know what you think.
TOM
|