Nice meeting you also.speaking of ingenuity. I figured out a pump housing from a dishwasher can be used for alot of things. I am building an air flow intake for my torque converter. I removed the guts and impeller. I kept the screen. I am mounting it in between the seats up high, with the housing intake facing forward. I am running a 12 volt pentium 4 cooling fan on the intake with a filter on it since it will be mounted up high with unobstructed air flow it will be away from all the mud and debris and stuff. It will blow air into the converter intake which also has an impeller of it's own, so this will increase air flow to the converter, possibly doubling the the air flow. I am going to run a seperate switch to turn it on and off whenever I want. I think I may also do the same with my carb intake and run a round type of filter on that.Also this flange inlet will give me many different option to adapt any air filter I want to put in it.
pump1.jpg