So the Kendas front and rear are fine . These are 6 ply tires so i had to lower the air pressures from 15 to 10 lbs. Steering is still crisp and does not bounce as much with the lower pressures . I may go down to 8 lbs next but the track is still dusty since rain has been hit and miss. I still wish i could regear within 2 teeth on the rear or 1 on the front larger . The FMF pipe pulls better on top end than the Bugle pipe but im only turning 7,500 rpm . Just 500 rpm more would be perfect. Dazon uses double row sprockets but i cant find any but the stock ones, 16/31. I do have the parts to go to a single row sprocket setup if I can find any sprockets. Loooking for 17 front or 32-34 rear any ideas whre to find them ?
BTW... Has Hammerhead style rear axle and reverse.