to check timing i lined the t up with the mark for tdc then for the cam gear i referanced the large hole in between the two smaller holes it was off center a bit. i put everything back together and ajusted the valves to .004, redid the compression test with the same results..well for the most part it built up 10 or 15 lbs on the dry test this time. pretty sure it will be the rings, but everything looks good and clean on the inside. then again ive seen stranger. ill get it back apart, shoot some pics and post them up. till then im interested in all input on this. thanks again. would you let me know what a cylinder kit from you would cost? i live in houston tx. ill do the valve leak test when i get it back apart.
|