Pic came through!!! BMI sells the standard Howhit (Yerfdog Spiderbox) 13t sprocket, cut a piece of pipe to space out the rest of the distance on the shaft for the nut to fit. If the 13t sprocket isn't the right tooth count I can get you a link to a 14t,15t,16t with the right spline count (19)-this scooter shaft will also let you install the external reverse kit, that shaft is a 1/2" shorter than the ones that came with reverse but it still works. Since it's a Spiderbox type build you can set the axle sprocket accordingly after the engine is installed.BMI may sell the the Spiderbox front wiring harness-on/off switch,start button that plugs right in to your 4 pin outlet.See if they have the stock exhaust pipe too, you can always change the muffler-at least you'll have a pipe to work with that will bolt up to that engine.
Last edited by metalstudman1; 10-13-2011 at 09:16 PM.
|