No the rollers are not stamped you will need a small grams scale to weigh, but depending on the year they should be around a 24gr. For trail ridding with moderate hills 18 gr should do you just right. I would also replace the torque spring as well along with the clutch springs. The carb will have either a 114 or 118 jet depending on year of buggy. Some of the newer ones ran even leaner with a 110 jet. You will be somewhere around a 120 to 122 jetsize. You also need to open up the end of muffler to allow more flow, this also will depend on year of buggy, some of the early models had only a 3/4" tail opening, you will want to expand it to about 1 1/2". You can give me a call @ 662-301-1563 to discuss further if you would like. I can cover a lot more with you talking person to person for I am a 1 finger typer so we could cover a lot more ground in less time. You can also e-mail me your # with a good time to call and I'll get back to you.
TOM
|