I've got it all disconnected again. The rear caliper piston is frozen pretty hard; I'll try to disassemble and service it. The right front was partially frozen, but broke loose with air, while the left front was not frozen. All three lines are clear. I plan to go into the MC and see what needs servicing - o rings, ball bearing, etc. I may actually be making progress. Also plan to try to buy some replacement banjo fitting washers, figuring they need replacement routinely when taking hoses apart. While I'm at it, I probably should go into all three calipers just in case. What kind of lube is needed for the pistons, etc.?
|