Yes that kit will work. The flangettes wil fit the stock yerf hangers . the stock yerf bearing are 25mm so they are a touch too tight for a 1" axle. the hub would work, it's the same bolt pattern as the sprocket and disc rotor.
The SS braided brake lines.. I honestly don't have a clue what they come from . They were included in a of a grab bag bunch of stuff I bought at auction at the closing of a motorcycle dealership. it was a Harley dealer so I asume they come from some harley model. I ran rigid line around the swing arm to do away with the rubber brake hose and used those section of braided for the floating sections, the caliper and the swingarm pivot point. Can't tell if it works any better but it's a lot stronger and dependale.
|