Just an update. You will need to get a axle nut 16m x 1.5 the cable cannot have the additional metal hex tube on the shifter end. It won't go through the end of the shifter. This is the second cable listed in the first post.
The small brace bolts to one threaded hole next to the fan housing. It is recommended to make a second brace to double up from the back of the fan housing location to the bottom of the case. These cases are prone to cracking.
Lastly, there is no included way to attach the cable to the shifter arm. The cable has a steel ball swedged on the end of the cable. I need a source for the cable to arm adapter.
Make sure to lube the cable internally before install!
__________________
If the only tool you have is a hammer,
Then all your problems look like nails.
|