[SYCARMS]

I use Valvoline Moly Lithium wheel bearing grease. When you disassemble the clutch to seperate the pulley you will need to remove the sleeve the torque spring slips over. Under the sleeve will be 3 or 4 pins that have to be removed in order to seperate. You will want to grease this area liberally but not too liberal since you don't want any grease to ooz out and get on the clutch shoes and drum. I can get the covers but they as I remember are not cheap. I can price it Monday for you if you like. Also if you would like you can e-mail me your phone number along with a good time to call and I will call you with a quote and answer any other questions you might have. <tom@sycpowersports.com>