I know this is an older thread but I just purchaced one yesterday ($119 at HF) and replaced a techumse 6hp on Son's old cart. Everything matched up well. The shaft was actually a little longer than the techumse shaft (barely). I loosened the throttle pivot and the return spring works well. (side hook-up). The throttle linkage already had a return spring at the peddle which helps. The carb spring basically just keeps the cable straight when returning to idle. Took it down the road for test run and all went well except for a smell of rubber from the CVT belt. This afternoon I will check the alignment as it was pretty dark when I finished and the skeeters were biting.
|