4 on 4 on the front and 110mm on the back is what most people go with.
You can get 4x4" front rims in 8 or 10" size.
What other upgrades do you plan on doing to the front end? Just like MSM said if you plan on going with front breaks you will want to get some of the BDX front hubs (110mm). They are a bolt up application but they have been out of stock for ever. You also have to send the spindles in to have them weld on tabs to mount the break calipers.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
|