Thread
:
brakes not working
View Single Post
#
11
06-05-2012, 02:02 PM
Bryce
Lurker
Join Date: Jan 2011
Posts: 24
Does yours look like this? Two brake disks and two calipers? This is required because of the differential in the gear box. The rods should be adjustable for each caliper but if they are not engaging, then you need to adjust the arm that sticks out of the caliper. Look at picture with yellow arrow. Adjust this bolt a little bit each time until the brakes start engaging as the rod pulls forward. You will need to do this on each caliper.
Bryce
View Public Profile
Send a private message to Bryce
Find all posts by Bryce