Yep the Bearings from BMI should work just fine, and from the looks of your spindle you have a Gen 3 (even A-Arm, with built up spindle).
Eventually your gonna want to get some bigger wheels up front, and grab some new spindles, are build the stock ones up a little better like MSM said... If you don't want to fab some, there is a site has a nice pair for a decent price, and they have a life time warranty and you have a longer axle to space the wheels out on so they wont rub the frame when you turn (after doing mods to the rack-N-pinion for better turning radius).
All this will come in time, but for now the bearings I linked should work. Just do the measurements they should add up.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
Last edited by T3beatz; 06-15-2012 at 09:53 AM.
|