Quote:
Originally Posted by T3beatz
That tire/rim setup doesn't fit the stock bolt pattern. For the rear you need 4x110mm rims (the stock ones are fine) You will just need to find some good tires So you can go here... this is a good all around tire for the rear and this place ships for free over 99 bucks http://www.rockymountainatvmc.com/p/...-Sand-ATV-Tire
If you have a cam and do a head swap, 10g rollers would be overkill, I'd go with sliders, maybe 12-13g like I was saying, they still give you the low you need but will get you higher variation than the rollers will. So you will have the grunt and the extra speed also |
u know what also i forgot about with adding taller tires its going to drop the top end speed, maybe ill just try the 1500rpm spring first. If i buy those duro mud tires will those 22x11x8 tires fit on the stock wheels.