Ok, you don't want to get the kits with any spacers that are 1/2" inner diameter. You want 3/8" ID spacers.
High misalignment ones are used if you need the extra angel from the A-arms, I find that the standard cone spacers work just fine for the type of angle from the spiderbox.
they used to have the kits with the 1/2" heims and bungs, with 3/8" spacers but they don't have them anymore, so you will need to order the spacers separately.
__________________
T.J.
Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor.
|