I got it to fire. I have a power probe and was using it to check the wires for a possible broken connection. I touched the probe to the yellow wire with the blue stripe that connects to the blue wire from the stator and the spark plug arced. I then put the plug back in the cylinder and cranked the motor while touching the power probe to the yellow wire and the motor fired. I cant just hold it on there I have to pulse it to get the plug to fire. I am assuming by this that there is something wrong with the stator or pick up??? Any suggestions?? I did not push the switch on the power probe only touched it to it. I got a dim green light when doing so.
Thanks for any input!!
|