Well said slestak, I run the power link gates also. Had to put a good used belt in for this trip this weekend because when I removed the engine to fix the blown out gasket the belt that is only 10 months old was cracked and got cooked from the heat.
I also drilled 3 8mm holes around the center of the cvt cover were the center lower vent is to increase air flow.
I cant remember who it was that removed the plastic cover and added mesh and a screen to increase air flow around the rear clutch pulley, That will be my next mod on my extra cvt cover that has the howhit plastic cover. Both bugys have solid cvt covers that some air holes would help but if any mud or water got in it would be not good.
|