Quote:
Originally Posted by xlint89
Make sure you have a ground from the elec panel/block to the engine itself. There's a wire that grounds to the CVT cover near the front. I can't tell you how many times I've forgot to re-install that ground wire when I took the cover off.
|
Awesome! I did not have a ground going to the engine block. I ran one from the electric panel to the engine block and the starter will fire when I short out the relay. (The push start button still does nothing) Only problem now is I have no spark. I removed the spark plug and set it on the tire while shorting out the relay, and I can see nothing happening.
I'm leaning towards blaming the start button/kill switch.. It is one of the few pieces still on the kart from the original motor/electrical system.
Ideas?