If I add an oil cooler, there will be a number of areas to tap a gauge in. I could add a gauge now where the taps for the would be cooler would go. For the first few test runs, I will carry my infared point and shoot gauge, if I'm not comfortable with the temps on open land, then that will seal the deal on adding a cooler. I could use a head temp gauge, as you mentioned, but adding that to the long list of things needed might be overzealous.
If and when I add a cooler, I will no doubt add a temp and pressure gauge to it.
In all reality, I will likely bite the bullet, and add the cooler taps while I have the case apart, when else would as good a time as now.
__________________
ASE Master and Toyota Master Diagnostic Certified
Buggy Building Trainee
'04 Dazon Raider 150 'modded'
Last edited by Masteryota; 06-22-2013 at 05:50 PM.
|