HOW TO- Drill exhaust
This is how i did it.
First i removed the cover thing and the screen.
Then i drilled two pilot holes in between the screw holes.
Then with this 12" 3/8's drill bit
I drilled 3 of the holes all the way back as far as i could go. And also drilled two holes right down the center.
Then i drilled the other 3 holes with the 3/8's bit but i didnt go all the way back, just opened them up.
Thats it, sounds sweeeeet now.
__________________
2009 ASW Carbide Uni filter, outerwears, redneck intake, 130 main jet, 38 pilot jet, drilled exhaust, DR Pulley 9g sliders, 2000rpm clutch spring, adjustable CDI and 39T sprocket
2009 ASW Carbide 39T sprocket, DR Pulley 10g sliders, drilled exhaust
2010 ASW Vector bone stock
|