Quote:
Originally Posted by x-bird
from what i found, you'll need to fab on a coupler/adapter shaft at some point to increase the steering shaft to the correct diameter. the few that i found that fit the stock yerf shaft (i use a spiderbox shaft) seemed too chintzy for offroad buggy usage.
|
I found some 3/4 and 5/8 couplers, both in hex and splines, I have yet to measure the shaft sizes, although I think it might be 1/2". I feel the splines would hold better, due to increased contact patch, but who knows. I am ok with making something if needed for the long haul, as you can see I'm no stranger to fabb'n.
http://www.jegs.com/i/Wilwood/950/270-2017/10002/-1