So here is some detail on the RF upgrade to my flat track buggy.
The studs are 3/4 threaded bolts welded to the top and bottom of the spindles after i cut out the ball joints. I had to measure the correct angles to get the studs to sit correctly in relation to the heim joints.
It was the first run, so I plan to make another set for the Helix I just picked up and make some minor adjustments. Mainly the spacing for the overall spindle height so it is taller.
__________________
American Sportworks 6150
DIRT OVAL KING!!!
8 Wins in 2012
10 wins in 2013
|