Hi everyone,
I am trying to install my wire harness and i need some help since i do not know where each wire goes. i just want to make the buggy run with lights and turn indicators nothing more, i am not interested on the rpm or speed gauge or fuel gauge.
I have completely disassembled the buggy and now i am putting everything back together but i have no idea about the wire harness, its pretty messed up.
i have an 8 coil stator with 5 pins (3 pins on one plug and 2 separate wires) Green, yellow, white are the colours of the wires on the black plug.
my CDI is AC with 6 pins (with a 2 pin plug and a 4 pin plug)
CDI
Use this picture as reference to guide me on wiring the CDI
i have a rectifier with 4 wires on one plug
Regulator
Regulator plug
thank you