Picked up a non running Chinese 250 coolsterbuggy the other day.
It has no spark and it looks like the previous owner put on a new coil and cdi box, my first guess was the magnetic pickup or the stator.
I checked the stator for a short and found no continuity to ground on all 3 wires. I did a quick resistance check between all 3 wires and all 3 showed the same resistance .
5.2 If I remember correctly.
I would have said the stator is good at this point, except when I check for voltage when cranking the motor over I get nothing.
I would've expected 20 to 40 v AC while cranking the motor over. My question is am I missing some thing here? All tests show a good stator but no voltage.
Pic for the hell of it..lol