Quote:
Originally Posted by tkeagle
Just posting this pic real quick while on computer. A aftermarket gas tank was installed. I dont see anything wrong with stock gas tank, and its big enough for what we use it for. Want to put the Steel gas tank on the YD. But the set up is wierd to me. From the steel gas tank, has hoses out from the top of it. Then connects to the top of the stock gas tank. The other line goes to a fuel pump. From the stock fuel tank, it connects to the fuel pump also. The fuel pump connects to a hose that runs below the engine. Not sure what it connects to. Basicly go 2 hoses coming out of both tanks. one line connects the 2 gas tanks together. The other lines goes to a fuel pump. However, the only gas line connecting to the carb is the line coming out of steel gas tank, and is gravity feed. Is this some sort of duel tank setup? And how would I convert it to the stock gas tank?
|
Simply remove the second tank and run the line that went to the second tank to the carb.
The line that runs from the pump to the engine is what pulses the pump and makes it work. It's connected to the crankcase.