Quick question for the masses: I've read that the tongue coming off the front of the frame should be tilted upwards around 9° or 10°. Does that mean that the bulkhead is tilted at the same angle? I noticed a couple weeks ago that the 4 lower mounting bolt holes were pretty egg shaped..... and hopefully this weekend I'll be reinforcing the entire bulkhead. If the bulkhead is supposed to be at the same angle, I can make some side plates with the proper holes in them.
One other thing - can anybody confirm the sizes on the brake banjo bolts for me? I see BD has them at 10mm x 1.5 threads, but I just want to be certain (without pulling mine obviously.....).
Thanks in advance!
Last edited by Big Rich; 07-27-2016 at 11:46 PM.
|