Quote:
Originally Posted by SYCARMS
A 5/8" spindle is sketchy. Spindles on a ASW, HH, or Kinroad are 7/8" diameter but you would have to either find a bearing with larger ID or hubs to fit it.
|
5/8" Grade 8 is rock solid. It's actually overkill. I've got a lot of lifetime warranty spindles out there, and would have had to go bigger a long time ago if the 5/8" G8 wasn't up to snuff. I mentioned a bit more detail a few posts back:
http://buggymasters.com/forum/showpo...&postcount=102
Quote:
Originally Posted by Pripyat
My family was giving me a hard time last weekend about the buggy being "broken". I tried to explain that I'm not finished with it. Anyway, I went ahead and ordered bolts. Are you guys welding on both sides or just on the bolt head? I can't imagine that my through-hole will fit tightly enough to eliminate all flexing. But I also think adding heat from welding won't help matters, either..
|
You've got it right.
However, go with 6.5" on the bolt length.