sorry for the slow reply. There are only 2 going to the battery side of the solenoid. one wire goes to the fuse (that I replaced). the other wire (on the same side of the solenoid) goes to the battery. The other side of the solenoid has only one which I think goes to the starter.
I did notice that if I remove the one wire that goes to the fuse from the solenoid, the go kart never even attempts to turn over.
I also notice that it doesn't matter if the hazard switch is even connected. I unplugged it from the push button on the dash and the hazards still turn on and it beeps like crazy.
Definitely still willing to say that I've somehow jacked up installing the solenoid. I'm just not sure how. I'll try to look for some videos...
I very much appreciate the help.
|